|Total:19900 USD || |
|Item:19900 USD Shipping:0 USD|
FMUSER 1KW DTV Transmitter
ATSC DTMB DVB-T DVB-T2 ISDB-T
The FMUSER digital TV exciter with FPGA+DDS technology architecture with external new software radio technology, the full-chip soldering process and few components achieve superior performance while ensuring product quality reliability and performance consistency.
The device has 2 ASI inputs, 1 ASI loop out, and 1 RS232 interface.Support built-in GPS module (optional), support 2 IP input;
Full support for all working modes covered by various digital TV standards, with GPS 10MHz and 1PPS input and output ports;
Support single frequency network, satellite single frequency network and multi-frequency network working mode;
Support linear and nonlinear adaptive correction, nonlinear correction ACPR boost 12db (typical), linear correction in-band flatness correction gain 10db (typical), can improve the output performance of the transmitter.
The imported high-power FET (LDMOS) suitable for digital TV signal amplification is used as a power amplifier with excellent performance index and large power redundancy.
The pre-excitation amplifier adopts ALC circuit to ensure the stability of the output signal.
Excellent RF output performance and frequency stability, supporting local and remote configuration modulation parameters.
The whole machine has protection functions such as standing wave ratio, over power, over current, over voltage and over temperature.
High-efficiency switching power supply, long-life axial flow fan, large LCD screen display working parameters in real time.
The whole machine adopts 19" standard cabinet to work stably and reliably.
It can be widely used in digital TV broadcasting network construction, suitable for TV stations at all levels.
The machine adopts a hot-swappable modular structure to facilitate maintenance and repair of the transmitter;
The active and standby dual exciters can also be configured to further improve the reliability of the whole machine.
● Digital TV exciter with external new FPGA+DDS technology architecture, superior performance, high reliability and good consistency. Full support for all working modes of digital TV broadcast exciter's various standard coverage, supporting single/multi-frequency network mode supporting both multi-carrier and single-carrier.
● Support linear nonlinear adaptive correction pre-distortion function, advanced adaptive algorithm, call the corresponding calibration curve according to the communication interface command, especially optimized for multi-fit high-efficiency power amplifier, the correction effect is excellent.
● Digital TV exciter built-in GPS module (optional), support 2 channels of IP input, support full duplex, single network port simultaneous bidirectional transmission, support automatic switching of four input signals, mutual backup, support for all input streams simultaneously The ability of the effective bit rate to detect. When the effective code rate of the main path is lower than the threshold, it will automatically switch to the next stream with the effective code rate higher than the threshold, and issue an alarm. The switching time is less than 1 second; the switching sequence is analogous, if all The effective code rate of the road does not reach the threshold, keep the original main channel broadcast, do not switch, and issue an alarm; when a certain channel code rate is lower than the threshold (can be set), an alarm message is sent; no stream input When the exciter RF normal power output.
● Support transmitter output signal monitoring, transmitter output RF index MER monitoring accuracy is not less than 40db, shoulder monitoring accuracy is not less than 50db, error does not exceed 2db.
● Modular design concept, each power amplifier module and switching power supply module are hot-swappable for long-term maintenance and upgrade, improving reliability.
● Backup redundancy design, can achieve zero off-air rate.Backup redundancy design of the exciter: The main exciter and the backup exciter are backed up and automatically switched. (The exciter is optional.) When the main exciter fails, it automatically switches to the alternate exciter without interruption.Power amplifier backup redundancy design: multiple power amplifier synthesis; power amplifier modules have high consistency, can be used for backup, and can be replaced.Backup redundancy design of power supply: Multiple switching power supplies are connected in parallel to supply current, and the microcomputer monitors the working state of the power supply and adaptively adjusts the working state of the power supply.
● It has the functions of no code stream, excessive standing wave ratio, over power, over voltage, over current, over temperature protection and lightning protection measures for the whole machine and component level. Perfect protection measures to reduce equipment damage.
● With MLC and ALC control functions, the power control adopts closed-loop automatic gain control to ensure stable output power without drift. The switch has no shock pulse and power output ramp-up function, which better protects the transmitter and the whole machine and component level lightning protection measures. Perfect protection measures to reduce equipment damage.
● The power amplifier unit consists of four independent 300W power amplifiers. Each 300W power amplifier hot-swap module is installed in a 2U high 19-inch standard plug-in box. The inside is low-loss and high-isolated by two identical 150W power amplifier modules. In-phase synthesis, power redundancy design with large margin and high reliability.
● Power amplifier module uses the latest high efficiency and high standing wave ratio LDMOS tube, adopts microstrip impedance conversion technology, simple and efficient, good consistency, convenient maintenance and replacement. High linearity and high efficiency against high standing wave ratio LDMOS power amplifier, modular microstrip high gain power amplifier module to improve the efficiency of the whole machine.
● The power amplifier radiator adopts the patented thermal simulation design tooth type, which has small wind resistance, large heat dissipation area and high heat conduction efficiency.
● The whole machine is installed in a 19-inch standard cabinet, and the height can be customized according to customer requirements.
● Support Web network management, intelligent network management and monitoring, and with external RS232, TCP/IP and other communication interfaces. The computer control software with real-time detection and function of the whole machine working parameters has self-diagnosis function. With various monitoring and alarm functions, various technical parameters can be read through the LCD panel on the front panel.
● The brand's high-quality switching power supply has protection measures such as overvoltage, overcurrent, undervoltage, overtemperature, short circuit and lightning protection. It has high efficiency, good voltage regulation range and strong adaptability to external power. The flexible N+1 hot plug configuration scheme and parallel current sharing are used for centralized power supply. Redundant configuration is also available upon request.
●The whole machine adopts a domestically produced high-quality long-life and large-volume centrifugal fan with large air volume redundancy, which makes the transmitter compact and beautiful in appearance, ensuring the normal operation of the whole machine.
1. Operating frequency band: VHF/UHF
2. Output power: 1000W
3. Output impedance: 50Ω
4. Allow reflection loss of the workload: ≥20dB
5. Unwanted transmission: ≤-50dB in adjacent channels ≤-60dB outside the adjacent channel
6. In-band unevenness: <±0.5dB
7. Shoulder: ≤-40dB
8. MER: ≥36dB
9. Spectrum template: comply with the relevant provisions of the out-of-band spectrum template in GB20600-2006
10. Phase noise: <-70dBc/Hz @10Hz<-90dBc/Hz @10kHz <-100dBc/Hz @100Hz <-105dBc/Hz @1kHz<-115dBc/Hz @100kHz<-130dBc/Hz @1MHz
11. RF output interface: φ40-50K/IF70-50K/IF45-50K
12. Power: Three-phase 380VAC / three-phase 220VAC
13. Working environment temperature: -10～+45°C
14. Dimensions: 19"30U/574mm (width) × 1450mm (height) × 1150mm (deep)
15. Weight: 380Kg
16. Digital Television Standard (optional):
1. National Terrestrial Digital Television Standard (DTMB): GB20600-20062.
China Mobile Multimedia Broadcasting (CMMB): GY/T220.1-20063.
Terrestrial digital TV standard European standard: (DVB-TC(H)): ETS13007444.
Terrestrial digital TV standard Japanese standard: ISDB-T (ARIB STD-B31) and ISDB-TB standard5.
Digital terrestrial television standard American standard: ATSC-T A/53
|Total:19900 USD || |
|Item:19900 USD Shipping:0 USD|
How far(long) the transmitter cover?
The transmission range depends on many factors. The true distance is based on the antenna installing height , antenna gain, using environment like building and other obstructions , sensitivity of the receiver, antenna of the receiver . Installing antenna more high and using in the countryside , the distance will much more far.
EXAMPLE 5W FM Transmitter use in the city and hometown:
I have a USA customer use 5W fm transmitter with GP antenna in his hometown ,and he test it with a car, it cover 10km(6.21mile).
I test the 5W fm transmitter with GP antenna in my hometown ,it cover about 2km(1.24mile).
I test the 5W fm transmitter with GP antenna in Guangzhou city ,it cover about only 300meter(984ft).
Below are the approximate range of different power FM Transmitters. ( The range is diameter )
0.1W ~ 5W FM Transmitter ：100M ~1KM
5W ~15W FM Ttransmitter : 1KM ~ 3KM
15W ~ 80W FM Transmitter : 3KM ~10KM
80W ~500W FM Transmitter : 10KM ~30KM
500W ~1000W FM Transmitter : 30KM ~ 50KM
1KW ~ 2KW FM Transmitter : 50KM ~100KM
2KW ~5KW FM Transmitter : 100KM ~150KM
5KW ~10KW FM Transmitter : 150KM ~200KM
How to contact us for the transmitter?
Call me +8615915959450 OR
Email me [email protected]
1.How far you want to cover in diameter ?
2.How tall of you tower ?
3.Where are you from ?
And we will give you more professional advice.
FMUSER.ORG is a system integration company focusing on RF wireless transmission / studio video audio equipment / streaming and data processing .We are providing everything from advice and consultancy through rack integration to installation, commissioning and training.
We offer FM Transmitter, Analog TV Transmitter, Digital TV transmitter, VHF UHF Transmitter, Antennas, Coaxial Cable Connectors, STL, On Air Processing, Broadcast Products for the Studio, RF Signal Monitoring, RDS Encoders, Audio Processors and Remote Site Control Units, IPTV Products, Video / Audio Encoder / Decoder, designed to meet the needs of both large international broadcast networks and small private stations alike.
Our solution has FM Radio Station / Analog TV Station / Digital TV Station / Audio Video Studio Equipment / Studio Transmitter Link / Transmitter Telemetry System / Hotel TV System / IPTV Live Broadcasting / Streaming Live Broadcast / Video Conference / CATV Broadcasting system.
We are using advanced technology products for all the systems, because we know the high reliability and high performance are so important for the system and solution . At the same time we also have to make sure our products system with a very reasonable price.
We have customers of public and commercial broadcasters, telecom operators and regulation authorities , and we also offer solution and products to many hundreds of smaller, local and community broadcasters .
FMUSER.ORG has been exporting more than 13 years and have clients all over the world. With 13 years experience in this field ,we have a professional team to solve customer's all kinds of problems. We dedicated in supplying the extremely reasonable pricing of professional products & services. Contact email : [email protected]
We have modernization of the factory . You are welcome to visit our factory when you come to China.
At present , there are already 1095 customers around the world visited our Guangzhou Tianhe office . If you come to China , you are welcome to visit us .
This is our participation in 2012 Global Sources Hong Kong Electronics Fair . Customers from all over the world finally have a chance to get together.
Where is Fmuser ?
You can search this numbers " 23.127460034623816,113.33224654197693 " in google map , then you can find our fmuser office .
FMUSER Guangzhou office is in Tianhe District which is the center of the Canton . Very near to the Canton Fair , guangzhou railway station, xiaobei road and dashatou , only need 10 minutes if take TAXI . Welcome friends around the world to visit and negotiate .
Contact: Sky Blue
E-mail: [email protected]
Address: No.305 Room HuiLan Building No.273 Huanpu Road Guangzhou China Zip:510620
English: We accept all payments , such as PayPal, Credit Card, Western Union, Alipay, Money Bookers, T/T, LC, DP, DA, OA, Payoneer, If you have any question , please contact me [email protected] or WhatsApp +8615915959450
We recommend you use Paypal to buy our items ,The Paypal is a secure way to buy on internet .
Every of our item list page bottom on top have a paypal logo to pay.
Credit Card.If you do not have paypal,but you have credit card,you also can click the Yellow PayPal button to pay with your credit card.
But if you have not a credit card and not have a paypal account or difficult to got a paypal accout ,You can use the following:
Western Union. www.westernunion.com
Pay by Western Union to me :
|First name/Given name: Yingfeng
Last name/Surname/ Family name: Zhang
Full name: Yingfeng Zhang
T/T . Pay by T/T (wire transfer/ Telegraphic Transfer/ Bank Transfer)
SWIFT BIC: BKCHHKHHXXX
Bank name: BANK OF CHINA (HONG KONG) LIMITED, HONG KONG
Bank Address: BANK OF CHINA TOWER, 1 GARDEN ROAD, CENTRAL, HONG KONG
BANK CODE: 012
Account Name : FMUSER INTERNATIONAL GROUP LIMITED
Account NO. : 012-676-2-007855-0
* It will be sent in 1-2 working days when payment clear.
* We will send it to your paypal address. If you want to change address, please send your correct address and phone number to my email [email protected]
* If the packages is below 2kg,we will be shipped via post airmail, it will take about 15-25days to your hand.
If the package is more than 2kg,we will ship via EMS , DHL , UPS, Fedex fast express delivery,it will take about 7~15days to your hand.
If the package more than 100kg , we will send via DHL or air freight. It will take about 3~7days to your hand.
All the packages are form China guangzhou.
* Package will be sent as a "gift" and declear as less as possible,buyer don't need to pay for "TAX".
* After ship, we will send you an E-mail and give you the tracking number.
|For Warranty .
Contact US--->>Return the item to us--->>Receive and send another replace .
Name: Liu xiaoxia
Please return to this address and write your paypal address,name,problem on note:
Address: 305Fang HuiLanGe HuangPuDaDaoXi 273Hao TianHeQu Guangzhou China.