350W 2U FSN-350T Professional FM Broadcast Radio Transmitter 87.5-108 MHz + 1KW FU-DV2 Dipole Antenna + 20 meters cable with connectors cover cover 20KM-50KM
350W 2U FSN-350T Professional FM Broadcast Radio Transmitter 87.5-108 MHz + 1KW FU-DV2 Dipole Antenna + 20 meters cable with connectors cover cover 20KM-50KMOVERVIEW: FMUSER hereby presents newly innovated FSN-350T 350W FM transmitter with touch screen to all FM broadcast fans with due respect. Exclusively from other 350W transmitter in the market, FMUSER 350W radio FM transmitter features by its human-friendly touch screen operation interface, highly stable and reliable performance and near CD quality stereo sound effect, which make it a remarkable improvement in the whole market, and leads to its high popularity in using for the most of FM radio stations. The DSP(Digital Sound Processing) technology makes the FSN-350T 350W FM transmitter an enjoyable sound broadcasting device for all music lovers, you’ll no longer be bothered by the noises or distortions. As quality assurance, FMUSER Provides 5 YEAR warranty for this FMUSER FSN-350T 350W Professional FM transmitter. , you’ll have no worries to use it for the radio station.
FREQUENTLY APPLICABLE USES: 1). Community Radio stations OUTSTANDING FEATURES: 1) OVERHEAT PROTECTION: The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range. 2) OVER SWR PROTECTION:SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile. 3) FAN ERROR ALARMWhen the fan stopped running, there will be alarming message showing on the screen like the following:
When audio mixers are connected with the 350w FM transmitter through the XLR Balanced audio input interface, the transmitter will provide plenty of options for the modulation to best match with the mixer. 6) ONE TOUCH OPERATION:This FSN-350T 350w FM transmitter is designed with a precisely sensitive touch screen in replace of the control buttons on previous transmitters. With all information displayed clearly on the screen, users can control and configure all parameters very easily.
8) ADJUSTABLE POWER OUTPUT The RF out of this 350w FM transmitter is continuously adjustable from 0-350 watt at the stepping of 0.1watt, which means you can tune it to 1w, 1.1w, 1.2w...50w...80w..150w..350w.., with just one transmitter you’ll get multiple modes of outputs and easy to tune as per your needs. 9) LONG COVERING RADIUS PANEL DESCRIPTION: 1. LCD Touch Screen 2. Vents 3. Power Switch 4. Power Supply Plug 5. RF output interface 6. XLR Input-Left 7. XLR Input-Right 8. Fan 9. Fuse 10. Vents 11. Aux-in ( To Input RDS and MPX Signal) 12. RS-232 Communication port (For Exit Factory Configuration Test) TECHNICAL SPECIFICATION:
RF Part: Frequency: 87.5-108MHz,Frequency step value: 10KHz Modulation: FM, peak deviation ± 75KHz Frequency stability: <± 100Hz Frequency stabilization method: PLL frequency synthesizer RF output power: 0~350 watts ± 0.5dB Residual wave: <- 70dB Higher harmonics: <- 65dB Parasitic AM: <- 50dB RF output impedance: 50Ω RF output connector: N female Audio input connector: XLR female AUX input connector: BNC female Pre-emphasis: 0us, 50us, 75us (user setting) S / N ratio mono:> 70 dB (20 to 20KHz) S / N ratio stereo:> 65 dB (20 to 15KHz) Stereo resolution: -50dB Audio frequency response: 30 ~ 15000Hz Audio distortion: <0.3% Audio level gain: -12dB ~ 12dB step 3dB Audio input: -19dB ~ 5dB General Features: FMUSER FU-DV2 New FM Dipole Antenna for fm transmitter broadcasting FM Antenna for 1kw FM transmitter
Technical Specification: * Band II Dipole
The package include : 1pc 350W FM Transmitter ( power supply already include inside ) 1pc Two bay Dipole 88Mhz to 108Mhz continue adustable antenna 1pc 20Meters feeder cable with connector
|